Netopia 2200 User Manual
Page 298
298
id (1) [ 1 - 4095 ]: 52
type (by-port) [ by-port ]:
admin-restricted (off) [ off | on ]: off
port
(port) node list ...
Select (port) node to modify from list,
or enter new (port) to create.
•
At this point you have created a VLAN. It is called
vlan1, with vlan-id 52, without any
admin restrictions.
•
Next, add the por t
ethernet0 port to this VLAN:
port (?): 1
(1) has been added to the (port) list
1
interface ()
[ lan-uplink | ethernet0 | vcc1 ]: ethernet0
Netopia-3000/9459252 (vlan)>>
•
To make the VLAN vlan1 routable add the por t
lan-uplink:
Netopia-3000/9459252 (vlan)>> name vlan1
Netopia-3000/9459252 (vlan name "vlan1")>> set
"vlan1"
id (52) [ 1 - 4095 ]:
type (by-port) [ by-port ]:
admin-restricted (off) [ off | on ]:
port
(port) node list ...
1
Select (port) node to modify from list,
or enter new (port) to create.
port (?): 2
(2) has been added to the (port) list
2
interface ()
[ lan-uplink | ethernet0 | vcc1 ]: lan-uplink
Netopia-3000/9459252 (vlan name "vlan1")>>