Quantum Instruments DLT 7000 - Manual (Page 128)

SCSI Commands
5-24 Quantum DLT 7000 Tape System
INQUIRY Command (12h) (continued)
Bit
Byte
7 6 5 4 3 2 1 0
0 Peripheral Qualifier Peripheral Device Type
1 Page Code (C0h)
2 Reserved
3 Page Length (20h)
4 - 5 Servo Firmware Checksum
6 - 7 Servo EEPROM Checksum
8 - 11 Read/Write Firmware Checksum
12 - 35 Read/Write Firmware Build Data
Figure 5–9 Firmware Build Information Page (VU) (C0h)- Data Format
Table 5–12 Firmware Build Information Page (VU) - Field Descriptions
Field Name Description
… Checksum Servo Firmware, Servo EEPROM, and READ/WRITE Firmware
checksums are given as binary numbers and are for positive firmware
and EEPROM identification.
Firmware Build
Date Firmware Build Date is an ASCII string in the DD-MMM-YYYY
HH:MM:SS format.