Quantum Instruments DLT 7000 - Manual (Page 160)

SCSI Commands
5-56 Quantum DLT 7000 Tape System
LOG SENSE Command (4Dh) (continued)
Bit
Byte
7 6 5 4 3 2 1 0
0 -1
(MSB)
Parameter Code
(LSB)
2 DU DS TSD ETC TMC Rsv’d LP
3 04h
4 - 7
(MSB)
Counter Value
(LSB)
Figure 5–26 Log Parameters Format for Read / Write Compression Ratio LOG SENSE
Page (Parameter Codes 02h through 09h)
Table 5–29 Log Parameters for Read / Write Compression Ratio LOG SENSE Page Field
Descriptions (Parameter Codes 02h through 09h)
Field Name Description
Parameter Code Parameter Codes supported for the READ / WRITE COMPRESSION RATIO
page (codes 02h through 09h) are as follows:
Parameter – Code Descriptions
02h - Mbytes Transferred to Host
03h - Bytes Transferred to Host
04h - Mbytes Read from Tape
05h - Bytes Read from Tape
06h - Mbytes Transferred from Host
07h - Bytes Transferred from Host
08h - Mbytes Written to Tape
09h - Bytes Written to Tape