Quantum Instruments DLT 7000 - Manual (Page 26)

General Description and Specifications
1-2 Quantum DLT 7000 Tape System
1.2 PRODUCT FEATURES
The DLT 7000 tape drive offers the following product features:
• 35.0 GB Native, 70.0 GB Compressed Capacity (Formatted capacity
assuming a 2:1 data compression ratio. Note that actual compression ratio
depends on the type of data, SCSI bus limitations, and system
configuration.)
• Superior Error Detection and Correction
• Extensive Embedded Diagnostic/Self-Test Software
• Fast access to Data via Tape Mark Directory
• Tape-Loadable Firmware
1.3 PRODUCT SPECIFICATIONS
The following subsections contain full specifications for the Quantum DLT 7000
tape drive. Specifications for the DLTtape
 tape media cartridges are also
included.
1.3.1 Physical Specifications
Table 1 − 1 provides physical dimensions for the DLT 7000 tape system.
Table 1 −1 DLT 7000 Physical Dimensions
Description Integratible Version Tabletop Version
Height 8.26 cm (3.25 in) without front bezel;
8.64 cm (3.40 in) with front bezel. 12.40 cm (4.88 in)
Width 14.48 cm (5.70 in) behind front bezel;
14.91 cm (5.87 in) with front bezel. 22.86 cm (9.00 in)
Depth 22.86 cm (9.00 in) measured from back
of front bezel; 24.38 cm (9.60 in)
including front bezel 32.39 cm (12.75 in)
Weight* 2.9 kg (6 lb., 7 oz) 6.6 kg (14 lb., 9 oz)
Shipping
Weight* 3.9 kg (8 lb., 8 oz) 10.0 kg (22 lb.)
* depending on configuration.
Note: Mounting hole pattern for the bottom and sides of the drive is industry
standard.