Quantum Instruments DLT 7000 - Manual (Page 32)

General Description and Specifications
1-8 Quantum DLT 7000 Tape System
1.3.7 Power Requirements
The following table provides the applicable power requirements for both versions
of the tape drive. Note that the tabletop version requires ac power.
Table 1 −8 DLT 7000 Power Requirements
Requirement Integratible Version Tabletop Version
Electrical Rating (Auto Ranging) Not applicable 100 to 240 VAC
Power Requirements 37 W, steady state;
60 W, maximum 60 W, maximum
Power Consumption: +5
V (±5%) bus * 4.0 A,
steady state; 4.8 A,
maximum Not
Applicable
+12 V (±5%) bus * 1.8 A, steady state;
4.0 A, maximum Not Applicable
* = SCSI bus attached
NOTES:
1. 12 volts peak and 5 volts peak do not occur simultaneously.
2. All values are based on standard commercial switching power supply.