Quantum Instruments DLT 7000 - Manual (Page 201)

SCSI Commands
Quantum DLT 7000 Tape System 5-97
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
Table 5–47 EEPROM Vendor Unique Page Parameters (continued)
Name Value
Rep.
Default Length
(Bytes)
Usage
SCSIRESELRETRIES ASCII
Decimal
10 1 The number of reselection retries the drive
makes before giving up. Each reselection
retry occurs every 1 second. When set to
0, the drive does infinite reselection
retries.
SCSIRESRELNOP ASCII
Binary
0 1 SCSI Reserve / Release Unit commands are
no operation (if set).
SETEOMATBOM ASCII
Binary
0 1 Sets EOM field in byte 2 of Request Sense
data when encountering BOM
SETEOMATEW ASCII
Binary
0 1 Sets EOM field in byte 2 of Request Sense
data when encountering Early Warning
end of media for all operations
THIRDPARTYDEN ASCII
Decimal
0 1 Value of default third party density.
Requires ENATHIRDPARTYDENS = 1
1 Applied to DLTtape III format tape for DLT260 tape drive, DLT600 tape drive and DLT2000XT tape
drive. Applied to DLTtape IV format tape for DLT 4000 and DLT 7000 tape drive.
2 Parameter is not forced to a special format. Instead it is determined by the parameters selected via
MODE SELECT.