Quantum Instruments DLT 7000 - Manual (Page 191)

SCSI Commands
Quantum DLT 7000 Tape System 5-87
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
5.9.8 TapeAlert Page (1Ch)
The drive supports the TapeAlert Page that is used to set/change the supported
TapeAlert configuration options (use the MODE SENSE command to read the
settings of the TapeAlert page).
Bit
Byte
7 6 5 4 3 2 1 0
0 PS (0) 0 Page Code (1Ch)
1 Additional Page Length (0A)
2 Perf Reserved DExcpt Test Rsvd LogErr
3 Reserved MRIE
4 – 7
(MSB)
Interval Timer
(LSB)
8 – 11
(MSB)
Report Count / Test Flag Number
(LSB)
Figure 5–43 TapeAlert Page Format Descriptor - Data Format