Appendix d the tape cartridge, D.1 tape cartridge handling guidelines – Quantum Instruments DLT 7000 User Manual
Page 293
Quantum DLT 7000 Tape Drive
D-1
Appendix D
THE TAPE CARTRIDGE
This appendix covers:
•
Tape Cartridge Handling Guidelines (subsection D.1)
•
Tape Cartridge Inspection Procedure (subsection D.2)
•
Tape Cartridge Write-Protect Switch (subsection D.3)
•
Loading a Tape Cartridge (subsection D.4)
•
Unloading a Tape Cartridge (subsection D.5)
•
Using a Cleaning Tape Cartridge (subsection D.6)
D.1 TAPE CARTRIDGE HANDLING GUIDELINES
The tape drive can use one of the following types of DLTtape cartridge:
•
DLTtape III, 1200 feet/cartridge (medium dark gray plastic)
•
DLTtape IIIxt, 1800 feet/cartridge (white plastic)
•
DLTtape IV, 1800 feet/cartridge (charcoal plastic)
Ensure that your tape backup solution performs reliably by following the general
handling guidelines described in this subsection.
HANDLING GUIDELINES
•
Always keep each tape cartridge in its protective plastic case when
it is not in the tape drive.
•
When carrying tape cartridges in their cases, always orient the cases
so that the grooves in the cases interlock. This prevents the cases
from slipping apart and falling.
•
Never stack the tape cartridges in a stack of more than five.