Quantum Instruments DLT 7000 - Manual (Page 285)

Appendix B: EEPROM-Resident Bugcheck and Event Logs
Quantum DLT 7000 Tape System B-3
B.2.2 Event Log Packets
Event log packets are non-fatal and can occur to log information about
significant events. Refer to Table B-2 for a listing of the existing error codes that
are found within event log packets. Note that these logs are informational only.
Table B–2 Event Log Error Codes (Bytes 9 – 10)
Error Code Meaning
0xA400 Hard READ Error Log
0xA401 Hard WRITE Error Log
0xA402 Drive Error Log
0xA403 Loader Error Log
0xA404 Calibration Log1 Error Entry
0xA405 Calibration Log2 Error Entry
0xA406 EDC Error Detected by SCSI Port Code
0xA407 Directory Read Fail *
0xA408 Directory Write Fail *
0xA409 Unload Information Statistics
0xA40B Media Quality Log
0xA40C Spurious Eject
0x40D Directory Write on Unload Retries Failed *
0x40E Directory Write after Read Retries Failed *
0x40F Directory Read Retries Failure *
* Directory Read and Write Fail recoverable events are discussed below.