Quantum Instruments DLT 7000 - Manual (Page 254)

SCSI Commands
5-150 Quantum DLT 7000 Tape System
REQUEST SENSE Command (03h) (continued)
The following table provides the additional sense codes (ASCs) and additional
sense code qualifiers (ASCQs) that may be reported. Additional information,
explanations, or suggestions for action are included in some of the descriptions.
Table 5–72 Supported ASC / ASCQ in Hex
Sense Key ASC ASCQ Description
00 00 00 No Additional Sense Code
NO SENSE 01 Unexpected FM Encountered
02 End of Medium (EOM) Encountered
03 SetMark Encountered
04 Beginning of Medium (BOM) Encountered
05 EOD Encountered
5D 00 Tape Alert Failure Prediction Threshold Exceeded
5D FF False Exception Condition
01 00 17 Clean Requested (Non-Vendor Unique)
RECOVERED ERROR 0A 00 Error Log Overflow
0A 80 Error Log Generated
37 00 Rounded Parameter
3B 08 Repositioning Error
44 C1 EEROM Copy 1 Area Bad
44 C2 EEROM Copy 2 Area Bad
47 00 SCSI Parity Error
48 00 IDE Message Received
51 00 ERASE Failure
53 01 Unload Tape Failure
5B 02 Log Counter at Maximum
80 02 Cleaning Requested (use cleaning tape)
80 03 Soft Error Exceeds Threshold
02h 04 00 Unit Not Ready, Cause Nonreportable
NOT READY 04 01 Unit Not Ready, Calibration in Process
04 02 Unit Not Ready, LOAD Command Needed
04 03 Unit Not Ready, Manual Intervention Needed
30 02 Incompatible Format
30 03 Unit Not Ready, Incompatible Media (Cleaning
Cartridge) Installed
3A 00 Media Not Present
3A 80 Media Not Present, VU Cartridge Missing
5A 01 Operator Media Removal Request
03h 00 00 Medium Error
MEDIUM ERROR 04 02 Unit Not Ready, LOAD Command Needed
0C 00 WRITE Error (possible tape medium problem,
cleaning tape needed)
11 00 Unrecovered READ Error
11 08 Unrecovered READ Error, Incomplete Block Read