ZyXEL Communications 200 Series - Manual (Page 164)

Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
164
2 Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the Subnet Mask.
Click OK.
Figure 117 Device HA > Active-Passive Mode > Edit: Master ZyWALL Example
3 Set the Device Role to Master. This example focuses on LAN1’s connection to the
Internet through the wan1 interface, so turn on monitoring for the wan1 and lan1
interfaces. Enter a Synchronization Password (“mySyncPassword” in this example)
and click Apply.
Figure 118 Device HA > Active-Passive Mode: Master ZyWALL Example
4 Click the General tab. Turn on device HA and click Apply.