ZyXEL Communications 200 Series - Manual (Page 809)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
809
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
The listed cellular interface (%d) does has the wrong PIN code
configured.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
The ZyWALL could not check the signal strength for the listed cellular
interface (%d). This could be due to an error or being out of range of
the ISP’s cellular station.
"Interface cellular%d
cannot connect to the
service provider.
The listed cellular interface (%d) cannot connect to the ISP. This could
be due to an error or being out of range of the ISP’s cellular station.
"Interface cellular%d
is configured with
incorrect APN.
The listed cellular interface (%d) does not have the correct APN
(Access Point Name) configured.
"Interface cellular%d
is configured with
incorrect phone
number.
The listed cellular interface (%d) does not have the correct phone
number configured.
"Interface cellular%d
is configured with
incorrect username or
password.
The listed cellular interface (%d) does not have the correct user name
and password configured.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
The listed cellular interface (%d) is configured for a particular cellular
device (first %s), but a different cellular device (second %s) is inserted.
"Cellular device [%s
%s] has been inserted
into %s.
The cellular device (identified by its manufacturer and model) has been
inserted in or connected to the specified slot.
"Cellular device [%s
%s] has been removed
from %s.
The cellular device (identified by its manufacturer and model) has been
removed from the specified slot.
Table 302 WLAN Logs
LOG MESSAGE DESCRIPTION
Wlan %s is enabled. The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s
is the slot number where the WLAN card is or can be installed.
Wlan %s is disabled. The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s
is the slot number where the WLAN card is or can be installed.
Wlan %s has been
configured.
The WLAN (IEEE 802.11 b and or g) feature’s configuration has been
changed. %s is the slot number where the WLAN card is or can be
installed.
Interface %s has been
configured.
The configuration of the specified WLAN interface (%s) has been
changed.
Interface %s has been
deleted.
The specified WLAN interface (%s) has been removed.
Table 301 Interface Logs (continued)
LOG MESSAGE DESCRIPTION