ZyXEL Communications 200 Series - Manual (Page 776)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
776
System bootup. Do
expiration daily-
check.
The device processes a service expiration day check immediately after
it starts up.
After register. Do
expiration daily-
check immediately.
The device processes a service expiration day check immediately after
device registration.
Time is up. Do
expiration daily-
check.
The processes a service expiration day check every 24 hrs.
Read MyZyXEL.com
storage has failed.
Read data from EEPROM has failed.
Open /proc/MRD has
failed.
This error message is shown when getting MAC address.
IDP service has
expired.
The IDP service period has expired. The device can find this through
either a service expiration day check via MyZyXEL.com server or by
the device’s own count.
Content-Filter
service has expired.
The content filtering service period has expired. The device can find
this through either a service expiration day check via MyZyXEL.com
server or by the device’s own count.
Unknown TLS/SSL
version: %d.
The device only supports SSLv3 protocol. %d: SSL version assigned
by client.
Load trusted root
certificates has
failed.
The device needs to load the trusted root certificate before the device
can verify a server's certificate. This log displays if the device failed to
load it.
Certificate has
expired.
Verification of a server’s certificate failed because it has expired.
Self signed
certificate.
Verification of a server’s certificate failed because it is self-signed.
Self signed
certificate in
certificate chain.
Verification of a server’s certificate failed because there is a self-
signed certificate in the server’s certificate chain.
Verify peer
certificates has
succeeded.
The device verified a server’s certificate while processing an HTTPS
connection.
Certification
verification failed:
Depth: %d, Error
Number(%d):%s.
Verification of a server’s certificate failed while processing an HTTPS
connection. This log identifies the reason for the failure.
1st %d: certificate chain level
2nd %d: error number
%s: error message
Certificate issuer
name:%s.
Verification of the specified certificate failed because the device could
not get the certificate’s issuer name. %s is the certificate name.
The wrong format for
HTTP header.
The header format of a packet returned by a server is wrong.
Timeout for get server
response.
After the device sent packets to a server, the device did not receive
any response from the server. The root cause may be a network delay
issue.
Table 286 myZyXEL.com Logs (continued)
LOG MESSAGE DESCRIPTION