ZyXEL Communications 200 Series User Manual

Page 69

Advertising
background image

Chapter 3 Web Configurator

ZyWALL USG 100/200 Series User’s Guide

69

Interface

Status

Use this screen to see information about all of the ZyWALL’s interfaces and
their connection status.

Port Role

Use this screen to set the ZyWALL’s flexible ports as LAN1, WLAN, or DMZ.

Ethernet

Use this screen to manage Ethernet interfaces and virtual Ethernet
interfaces.

PPP

Use this screen to create and manage PPPoE and PPTP interfaces.

Cellular

Use this screen to configure settings for a cellular Internet connection through
an installed 3G card.

WLAN

Use this screen to configure settings for an installed wireless LAN card.

VLAN

Use this screen to create and manage VLAN interfaces and virtual VLAN
interfaces.

Bridge

Use this screen to create and manage bridges and virtual bridge interfaces.

Auxiliary

Use this screen to manage the AUX port.

Trunk

Use this screen to create and manage trunks for load balancing and link HA.

Routing

Policy Route

Use this screen to create and manage routing policies.

Static Route

Use this screen to create and manage IP static routing information.

RIP

Use this screen to configure device-level RIP settings.

OSPF

Use this screen to configure device-level OSPF settings, including areas and
virtual links.

Zone

Use this screen to configure zones used to define various policies.

DDNS

Profile

Use this screen to define and manage the ZyWALL’s DDNS domain names.

Status

Use this screen to view the status of the ZyWALL’s DDNS domain names.

Virtual
Server

Use this screen to set up and manage port forwarding rules.

HTTP
Redirect

Use this screen to set up and manage HTTP redirection rules.

ALG

Use this screen to configure SIP, H.323, and FTP pass-through settings.

Firewall

Use this screen to create and manage level-3 traffic rules.

VPN

VPN Connection

Use this screen to configure IPSec tunnels.

IPSec VPN

VPN Connection

Use this screen to configure IPSec tunnels.

VPN Gateway

Use this screen to configure IKE tunnels.

Concentrator

Use this screen to configure VPN concentrators (hub-and-spoke VPN).

SA Monitor

Use this screen to monitor current IPSec VPN tunnels.

SSL VPN

Access Privilege

Use this screen to configure SSL VPN access rights for users and groups.

Connection
Monitor

Use this screen to monitor current SSL VPN connection.

Global Setting

Use this screen to configure the ZyWALL’s SSL VPN settings that apply to all
connections.

L2TP VPN

L2TP Over IPSec

Use this screen to configure L2TP Over IPSec VPN settings.

Session Monitor

Use this screen to monitor current L2TP Over IPSec VPN sessions.

Table 6 Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Advertising
This manual is related to the following products: