ZyXEL Communications 200 Series - Manual (Page 794)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
794
Update the profile %s
has failed because of
invalid system
parameters.
Some system parameters are invalid to update FQDN, %s is the profile
name.
Update the profile %s
has failed because the
FQDN %s was blocked.
The FQDN is blocked by DynDNS , 1st %s is the profile name, 2nd %s
is the FQDN of the profile.
Update the profile %s
has failed because too
many or too few hosts
found.
%s is the profile name.
Update the profile %s
has failed because of
dyndns internal error
Update profile failed because of a dynsdns internal error, %s is the
profile name.
Update the profile %s
has failed because the
feature requested is
only available to
donators.
Update profile failed because the feature requested is only available to
donators, %s is the profile name.
Update the profile %s
has failed because of
error response.
Update profile failed because the response is incorrect, %s is the
profile name.
Update the profile %s
has failed because %s.
Update profile failed, and show the response message, 1st %s is the
profile name, 2nd %s is the reason.
Update the profile %s
has failed because of
unknown error.
Update profile failed because unknown error. Sometimes, the force
authentication will result in this error, 1st %s is the profile name.
Update the profile %s
has failed because
Username was empty.
DDNS profile needs username, %s is the profile name.
Update the profile %s
has failed because
Password was empty.
DDNS profile needs password, %s is the profile name.
Update the profile %s
has failed because
Domain name was empty.
DDNS profile needs domain name, %s is the profile name.
Update the profile %s
has failed because
Custom IP was empty.
The DDNS profile's IP select type is custom, and a custom IP was not
defined, %s is the profile name.
Update the profile %s
has failed because WAN
interface was empty.
If the DDNS profile's IP select type is iface, it needs a WAN iface, %s is
the profile name.
The profile %s has
been paused because
the VRRP status of WAN
interface was standby.
The profile is paused by device-HA, because the VRRP status of that
iface is standby, %s is the profile name.
Table 295 System Logs (continued)
LOG MESSAGE DESCRIPTION