Figure 255 vpn > ipsec vpn > vpn gateway > edit, Table 119 vpn > ipsec vpn > vpn gateway > edit – ZyXEL Communications 200 Series User Manual
Page 365
Chapter 20 IPSec VPN
ZyWALL USG 100/200 Series User’s Guide
365
Figure 255 VPN > IPSec VPN > VPN Gateway > Edit
Each field is described in the following table.
Table 119 VPN > IPSec VPN > VPN Gateway > Edit
LABEL
DESCRIPTION
General Settings
VPN Gateway
Name
Type the name used to identify this VPN gateway. You may use 1-31
alphanumeric characters, underscores(
_
), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Gateway Settings
My Address
Select how the IP address of the ZyWALL in the IKE SA is defined.
If you select Interface, select the Ethernet interface, cellular interface, VLAN
interface, virtual Ethernet interface, virtual VLAN interface, PPPoE/PPTP
interface, or auxiliary interface. The IP address of the ZyWALL in the IKE SA is
the IP address of the interface.
If you select Domain Name / IP, enter the domain name or the IP address of the
ZyWALL. The IP address of the ZyWALL in the IKE SA is the specified IP address
or the IP address corresponding to the domain name. 0.0.0.0 is invalid.