ZyXEL Communications 200 Series - Manual (Page 797)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
797
Can't get BROADCAST
address of %s
interface
The connectivity check process can't get broadcast address of
interface
%s: interface name
Can't use MULTICAST IP
for destination
The connectivity check process can't use multicast address to check
link-status.
The destination is
invalid, because
destination IP is
broadcast IP
The connectivity check process can't use broadcast address to check
link-status.
Can't get MAC address
of %s interface!
The connectivity check process can't get MAC address of interface.
%s: interface name
To send ARP REQUEST
error!
The connectivity check process can't send ARP request packet.
The %s routing status
seted to DEAD by
connectivity-check
The interface routing can't forward packet.
%s: interface name
The %s routing status
seted ACTIVATE by
connectivity-check
The interface routing can forward packet.
%s: interface name
Table 297 Device HA Logs
LOG MESSAGE DESCRIPTION
Device HA VRRP Group
%s has been added.
An VRRP group has been created, %s: the name of VRRP group.
Device HA VRRP group
%s has been modified.
An VRRP group has been modified, %s: the name of VRRP group.
Device HA VRRP group
%s has been deleted.
An VRRP group has been deleted, %s: the name of VRRP group.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Configuration of an interface that belonged to a VRRP group has been
changed, 1st %s: VRRP interface name, 2ed %s: %s: the name of
VRRP group.
Device HA syncing from
%s starts.
Device HA Syncing from Master starts when user click "Sync Now"
using Auto Sync, %s: The IP of FQDN of Master.
%s has no file to
sync, Skip syncing it
for %s.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
Master configuration
is the same with
Backup. Skip updating
it.
The System Startup configuration file synchronized from the Master is
the same with the one in the Backup, so the configuration does not
have to be updated.
%s file not existed,
Skip syncing it for %s
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
Table 296 Connectivity Check Logs (continued)
LOG MESSAGE DESCRIPTION