ZyXEL Communications 200 Series - Manual (Page 801)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
801
RIP v2-broadcast on
interface %s has been
enabled.
RIP v2-broadcast on interface %s has been enabled. %s: Interface
Name.
RIP send-version on
interface %s has been
changed to %s.
RIP send-version on interface %s has been changed to version 1 or 2
or both 1 2. %s: Interface Name.
RIP receive-version on
interface %s has been
changed to %s.
RIP receive-version on interface %s has been changed to version 1 or
2 or both 1 2. 2nd%s: Interface Name.
RIP send-version on
interface %s has been
reset to current
global version %s.
RIP send-version on interface %s has been reset to current global
version %s. 1st %s: Interface Name, 2nd %s: RIP Version
RIP receive-version on
interface %s has been
reset to current
global version %s.
RIP receive-version on interface %s has been reset to current global
version %s. 1st %s: Interface Name, 2nd %s: RIP
RIP v2-broadcast on
interface %s has been
disabled.
RIP v2-broadcast on interface %s has been disabled. %s: Interface
Name
OSPF on interface %s
has been stopped
because Device-HA
binds this interface.
Device-HA is currently running on the interface %s, so all the local
service have to be stopped including OSPF. %s: Interface Name
Area %s cannot be
removed. This area is
in use.
One or more interfaces are still using this area, so area %s cannot be
removed. %s: OSPF Area
Invalid OSPF %s
authentication of area
%s.
OSPF md5 or text authentication has been set without setting md5
authentication id and key, or text authentication key first.
Invalid OSPF virtual-
link %d md5
authentication of area
%s.
Virtual-link %s md5 authentication has been set without setting md5
authentication id and key first. %s: Virtual-Link ID
Invalid OSPF virtual-
link %s text
authentication of area
%s.
Virtual-link %s text authentication has been set without setting text
authentication key first. %s: Virtual-Link ID
Invalid OSPF virtual-
link %s authentication
of area %s.
Virtual-link %s authentication has been set to same-as-area but the
area has invalid authentication configuration. %s: Virtual-Link ID
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF md5 authentication is set on interface %s. %s: Interface
Name
Invalid OSPF text
authentication on
interface %s.
Invalid OSPF text authentication is set on interface %s. %s: Interface
Name
Table 298 Routing Protocol Logs (continued)
LOG MESSAGE DESCRIPTION