ZyXEL Communications 200 Series - Manual (Page 787)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
787
Firewall rule %d has
been moved to %d.
1st %d is the old global index of rule, 2nd %d is the new global index of
rule
Firewall rule %d has
been deleted.
%d is the global index of rule
Firewall rules have
been flushed.
Firewall rules were flushed
Firewall rule %d was
%s.
%d is the global index of rule, %s is appended/inserted/modified
Firewall %s %s rule %d
was %s.
1st %s is from zone, 2nd %s is to zone, %d is the index of the rule
3rd %s is appended/inserted/modified
Firewall %s %s rule %d
has been moved to %d.
1st %s is from zone, 2nd %s is to zone, 1st %d is the old index of the
rule
2nd %d is the new index of the rule
Firewall %s %s rule %d
has been deleted.
1st %s is from zone, 2nd %s is to zone, %d is the index of the rule
Firewall %s %s rules
have been flushed.
1st %s is from zone, 2nd %s is to zone
abnormal TCP flag
attack detected
Abnormal TCP flag attack detected
invalid state detected Invalid state detected
The Asymmetrical Route
has been enabled.
Asymmetrical route has been turned on.
The Asymmetrical Route
has been disabled.
Asymmetrical Route has been turned off.
Table 292 Sessions Limit Logs
LOG MESSAGE DESCRIPTION
Maximum sessions per
host (%d) was
exceeded.
%d is maximum sessions per host.
Table 293 Policy Route Logs
LOG MESSAGE DESCRIPTION
Can't open bwm_entries Policy routing can't activate BWM feature.
Can't open link_down Policy routing can't detect link up/down status.
Cannot get handle from
UAM, user-aware PR is
disabled
User-aware policy routing is disabled due to some reason.
mblock: allocate
memory failed!
Allocating policy routing rule fails: insufficient memory.
pt: allocate memory
failed!
Allocating policy routing rule fails: insufficient memory.
Table 291 Firewall Logs (continued)
LOG MESSAGE DESCRIPTION