ZyXEL Communications 200 Series - Manual (Page 765)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
765
Failed login attempt
to SSLVPN from %s
(reach the max. number
of simultaneous logon)
The listed user (%s) failed to log into SSL VPN because the maximum
number of simultaneous logons was already reached.
Failed login attempt
to SSLVPN from %s
(incorrect password or
inexistent username)
The listed user (%s) failed to log into SSL VPN because of entering
an incorrect password or a user name that does not exist.
Table 281 L2TP Over IPSec Logs
LOG MESSAGE DESCRIPTION
The configuration of
L2TP over IPSec has
been changed.
The L2TP over IPSec configuration has been modified.
L2TP over IPSec may not
work since Crypto Map
%s using Manual Key.
L2TP over IPSec does not support manual key management. L2TP
over IPSec may not work because the IPSec VPN connection it uses
(Crypto Map %s) has been set to use manual key management.
L2TP over IPSec may not
work since Crypto Map
%s using Tunnel Mode.
L2TP over IPSec does not support tunnel mode encapsulation. L2TP
over IPSec may not work because the IPSec VPN connection it uses
(Crypto Map %s) has been set to use tunnel mode encapsulation.
L2TP over IPSec may not
work since Crypto Map
%s is deactivated.
L2TP over IPSec may not work because the IPSec VPN connection it
uses (Crypto Map %s) has been turned off.
User %s has been denied
from L2TP service.
(Inexistent User)
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the user name does not exist.
User %s has been denied
from L2TP service.
(Disallowed User)
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the user name is not specified in
the L2TP over IPSec configuration.
User %s has been denied
from L2TP service.
(Incorrect Password)
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because the correct password was not
provided.
User %s has been denied
from L2TP
service.(Incorrect
Username or Password)
A user with the specified user name (%s) was denied access to the
L2TP over IPSec service because an incorrect user name or
password was provided.
User has been denied
from L2TP service.
(address pool
exhausted)
An attempted login to the L2TP over IPSec service failed because the
L2TP over IPSec IP address pool does not have any more IP
addresses to give out.
Table 280 SSL VPN Logs (continued)
LOG MESSAGE DESCRIPTION