ZyXEL Communications 200 Series - Manual (Page 810)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
810
Create interface %s
has failed. Wlan
device does not exist.
The wireless device failed to create the specified WLAN interface
(%s). Remove the wireless device and reinstall it.
System internal error.
No 802.1X or WPA
enabled!
IEEE 802.1x or WPA is not enabled.
System internal error.
Error configuring WPA
state!
The ZyWALL was not able to configure the wireless device to use
WPA. Remove the wireless device and reinstall it.
System internal error.
Error enabling WPA/
802.1X!
The ZyWALL was not able to enable WPA/IEEE 802.1X.
Station has
associated. Interface:
%s, MAC: %s.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
There was an EAP timeout for a wireless client connected to the
specified WLAN interface (first %s). The MAC address of the wireless
client is listed (second %s).
Station association
has failed. Maximum
associations have
reached the maximum
number. Interface: %s,
MAC: %s.
A wireless client with the specified MAC address (second %s) failed to
connect to the specified WLAN interface (first %s) because the WLAN
interface already has its maximum number of wireless clients.
WPA authentication has
failed. Interface: %s,
MAC: %s.
A wireless client used an incorrect WPA key and thus failed to connect
to the specified WLAN interface (first %s). The MAC address of the
wireless client is listed (second %s).
Incorrect password for
WPA or WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
A wireless client used an incorrect WPA or WPA2 user password and
failed authentication by the ZyWALL’s local user database while trying
to connect to the specified WLAN interface (first %s). The MAC
address of the wireless client is listed (second %s).
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
A wireless client used an incorrect WPA or WPA2 user name or user
password and failed authentication by the ZyWALL’s local user
database while trying to connect to the specified WLAN interface (first
%s). The MAC address of the wireless client is listed (second %s).
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message
There was an error when attempting to extract the EAP-Message from
a RADIUS message. The first %s is the WLAN interface. The second
%s is the MAC address of the wireless client.
Table 302 WLAN Logs (continued)
LOG MESSAGE DESCRIPTION