ZyXEL Communications 200 Series - Manual (Page 667)

Chapter 43 System
ZyWALL USG 100/200 Series User’s Guide
667
Figure 487 System > Date and Time
The following table describes the labels in this screen.
Table 230 System > Date and Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your ZyWALL.
Current Date This field displays the present date of your ZyWALL.
Time and Date
Setup
Manual Select this radio button to enter the time and date manually. If you configure a
new time and date, time zone and daylight saving at the same time, the time
zone and daylight saving will affect the new time and date you entered. When
you enter the time settings manually, the ZyWALL uses the new setting once you
click Apply.
New Time (hh-mm-
ss) This field displays the last updated time from the time server or the last time
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this field
and then click Apply.
New Date
(yyyy-mm-dd) This field displays the last updated date from the time server or the last date
configured manually.
When you set Time and Date Setup to Manual, enter the new date in this field
and then click Apply.
Get from Time
Server Select this radio button to have the ZyWALL get the time and date from the time
server you specify below. The ZyWALL requests time and date settings from the
time server under the following circumstances.
•
When the ZyWALL starts up.
• When you click Apply or Synchronize Now in this screen.
• 24-hour intervals after starting up.
Time Server
Address Enter the IP address or URL of your time server. Check with your ISP/network
administrator if you are unsure of this information.