ZyXEL Communications 200 Series User Manual

Page 795

Advertising
background image

Appendix A Log Descriptions

ZyWALL USG 100/200 Series User’s Guide

795

Update the profile %s

has failed because WAN

interface was link-

down.

DDNS profile cannot be updated for WAN IP because WAN iface is
link-down, %s is the profile name.

Update the profile %s

has failed because WAN

interface was not

connected.

DDNS profile cannot be updated for WAN IP because WAN iface is
PPP and not connected, %s is the profile name.

Update the profile %s

has failed because IP

address of WAN

interface was empty.

DDNS profile cannot be updated because the IP of WAN iface is
0.0.0.0, 1st %s is the profile name.

Update the profile %s

has failed because

ping-check of WAN

interface has failed.

DDNS profile cannot be updated because the ping-check for WAN
iface failed , %s is the profile name.

The profile %s has

been paused because

the HA interface of

VRRP status was

standby.

The profile is paused by Device-HA, because the VRRP status of that
HA iface is standby, %s is the profile name.

Update the profile %s

has failed because HA

interface was link-

down.

DDNS profile cannot be updated for HA IP address because HA iface
is link-down, %s is the profile name.

Update the profile %s

has failed because the

HA interface was not

connected.

DDNS profile cannot be updated for HA IP address because HA iface
is PPP and not connected, %s is the profile name.

Update the profile %s

has failed because IP

address of HA

interface was empty.

DDNS profile cannot be updated because the IP address of HA iface is
0.0.0.0, %s is the profile name.

Update the profile %s

has failed because

ping-check of HA

interface has failed.

DDNS profile cannot be updated because the fail of ping-check for HA
iface, %s is the profile name

DDNS has been disabled

by Device-HA.

DDNS is disabled by Device-HA, because all VRRP groups are
standby.

DDNS has been enabled

by Device-HA.

DDNS is enabled by Device-HA, because one of VRRP groups is
active.

Disable DDNS has

succeeded.

Disable DDNS.

Enable DDNS has

succeeded.

Enable DDNS.

DDNS profile %s has

been renamed as %s.

Rename DDNS profile, 1st %s is the original profile name, 2nd %s is
the new profile name.

DDNS profile %s has

been deleted.

Delete DDNS profile, %s is the profile name,

Table 295 System Logs (continued)

LOG MESSAGE

DESCRIPTION

Advertising
This manual is related to the following products: