Figure 362 apppatrol > general, Table 137 apppatrol > general – ZyXEL Communications 200 Series User Manual
Page 452
Chapter 27 Application Patrol
ZyWALL USG 100/200 Series User’s Guide
452
"
You must register for the IDP/AppPatrol signature service (at least the trial)
before you can use it.
See
for how to register.
Click AppPatrol to open the following screen.
Figure 362 AppPatrol > General
The following table describes the labels in this screen. See
for
more information as well.
Table 137 AppPatrol > General
LABEL
DESCRIPTION
Enable
Application
Patrol
Select this check box to turn on application patrol.
Enable BWM
This is a global setting for enabling or disabling bandwidth management on the
ZyWALL. You must enable this setting to have individual policy routes or
application patrol policies apply bandwidth management.
This same setting also appears in the Network > Routing > Policy Route screen.
Enabling or disabling it in one screen also enables or disables it in the other screen.
Enable
Highest
Bandwidth
Priority for
SIP Traffic
Select this to maximize the throughput of SIP traffic to improve SIP-based VoIP call
sound quality. This has the ZyWALL immediately send SIP traffic upon identifying
it. The ZyWALL ignores any other application patrol rules for SIP traffic (so there is
no bandwidth control for SIP traffic). When this option is enabled the ZyWALL also
does not record SIP traffic bandwidth usage statistics.
Registration
The following fields display information about the current state of your subscription
for IDP/application patrol signatures.
Registration
Status
This field displays whether a service is activated (Licensed) or not (Not Licensed)
or expired (Expired).
Registration
Type
This field displays whether you applied for a trial application (Trial) or registered a
service with your iCard’s PIN number (Standard). None displays when the service
is not activated.