ZyXEL Communications 200 Series - Manual (Page 417)

Chapter 26 L2TP VPN Example
ZyWALL USG 100/200 Series User’s Guide
417
Figure 302 VPN > IPSec VPN > VPN Connection > Edit
2 Click the Policy Advanced button. Enforce and configure the local and remote policies.
• For the Local Policy, create an address object that uses host type and contains the My
Address IP address that you configured in the Default_L2TP_VPN_GW. The
address object in this example uses the wan1 interface’s IP address (172.16.1.2) and is
named L2TP_IFACE.
• For the Remote Policy, create an address object that uses host type and an IP address
of 0.0.0.0. It is named L2TP_HOST in this example.
3 Click the Default_L2TP_VPN_Connection entry’s Enable icon and click Apply to
turn on the entry.
Figure 303 VPN > IPSec VPN > VPN Connection (Enable)