ZyXEL Communications 200 Series - Manual (Page 173)

Chapter 7 Status
ZyWALL USG 100/200 Series User’s Guide
173
Current Date/
Time This field displays the current date and time in the ZyWALL. The format is yyyy-
mm-dd hh:mm:ss.
VPN Status Click this to look at the VPN tunnels that are currently established. See Section
7.2.4 on page 178 .
DHCP Table Click this to look at the IP addresses currently assigned to the ZyWALL’s DHCP
clients and the IP addresses reserved for specific MAC addresses. See
Section
7.2.5 on page 179 .
Port Statistics Click this to look at packet statistics for each Gigabit Ethernet port. See Section
7.2.6 on page 180 .
Current Login
User This field displays the user name used to log in to the current session, the amount
of reauthentication time remaining, and the amount of lease time remaining. See
Chapter 35 on page 593 .
Number of Login
Users This field displays the number of users currently logged in to the ZyWALL. Click the
icon to pop-open a list of the users who are currently logged in to the ZyWALL. See
Section 7.2.8 on page 182 .
Boot Status This field displays details about the ZyWALL’s startup state.
OK - The ZyWALL started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The ZyWALL applied the system default
configuration.
Fallback to lastgood configuration - The ZyWALL was unable to apply the
startup-config.conf configuration file and fell back to the lastgood.conf configuration
file.
Fallback to system default configuration - The ZyWALL was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf ).
Booting in progress - The ZyWALL is starting up and still applying the system
configuration.
System
Resources
CPU Usage This field displays what percentage of the ZyWALL’s processing capability is
currently being used. Click the icon to display a chart of the ZyWALL’s recent CPU
usage.
Memory Usage This field displays what percentage of the ZyWALL’s RAM is currently being used.
Click the icon to display a chart of the ZyWALL’s recent memory usage.
Flash Usage This field displays what percentage of the ZyWALL’s onboard flash memory is
currently being used. Click the icon to display a chart of the ZyWALL’s recent flash
usage.
Active Sessions This field displays how many traffic sessions are currently open on the ZyWALL.
These are the sessions that are traversing the ZyWALL. Click the icon to display a
chart of ZyWALL’s recent session usage.
Licensed Service
Status
IDP
License
Status /
Remaining
days This field displays the current status of the license and how many days longer it is
still valid. If it displays 0 days, the license has expired. If the status is not Licensed,
click this to open the screen where you can activate or extend the license. See
Section 8.2 on page 186 .
Table 32 Status (continued)
LABEL DESCRIPTION