AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 100)

Physical Programming of Your Extension
MD Evolution – Dialog 4422 IP Office 100
Your extension then displays the number identifying the ring
melody that is currently selected, and prompts you to enter a
different melody number.
MELODY NO
z
Dial a ring melody number.
The selected ring melody is played; a different one is played each
time you enter a new ring melody number. Â
Press the Loudspeaker key on your extension.
The ring melody corresponding to the last number entered is pro-
grammed, a confirmation screen is displayed for several seconds,
and then the welcome screens for the physical programming of
your extension are re-displayed.
Your extension’s ring volume can be set directly on your extension
when your extension is idle, or when it is ringing to indicate an in-
coming call. Under these conditions: ì
Simply press either the + or - keys on your extension to
increase or decrease the ring volume.
Your extension’s ring volume increases or decreases as you press
the keys.
It is also indicated by the icon shown on the left when you are
adjusting the volume.
This adjustment is saved for all subsequent incoming calls, until you
adjust it once again.
Note: The type of ring that is defined is applicable for both
internal and external calls. These will, however, be distin-
guished by different cadences: for example, the cadence is
faster for incoming calls.
Current ring character: 5
Enter new character (0-9) : _