AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 68)

Voice Mail Services
MD Evolution – Dialog 4422 IP Office 68
*
z
Dial “*” in order for your call to be transferred to voice mail.
“*” is the code used by default to consult voice mail through the
automated attendant. It may have been replaced by “#”.
You are then connected to the voice mail system and are
prompted to dial the mailbox number you wish to access.
STATION NO
z
Dial your extension number, which is also your mailbox
number.
As with internal consultation, a system message prompts you to
enter your user password.
PASSWORD
z
Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “ Programming Your Extension’s Services ”
section.
You are now connected to your mailbox’s consultation menu (see
details to follow).
Notes:
Interaction with the voice mail system or automated attendant
is carried out through the exchange of DTMF codes. For an
internal call, the transition to DTMF end-to-end dialling is
automatic. It is also the default from an external analogue
DTMF extension. From a GSM mobile phone, transition to
DTMF end-to-end dialling may necessitate a specific
operation, depending on the GSM mobile phone involved.
The above method is also applicable for consulting your
voice mail from a third party set within your facility. Simply
begin by dialling the internal number – typically 885 – for the
automated attendant.
An alternative solution for accessing your mailbox from out-
side your facility is dialling your DID number. If your extension
is successfully connected to the voice mail system, the rest
of the procedure is identical to that described.