AASTRA 4422 IP Office for MD Evolution User Guide User Manual

Page 86

Advertising
background image

Group Services

MD Evolution – Dialog 4422 IP Office

86

Opening/Closing a Hunt Group

You may be designated as a supervisor for one or several hunt

groups, regardless of whether or not you are a member of it (them).

This is established by a right that is assigned specifically to you by

your system administrator.
In relation to this (these) hunt group(s) for which you are in charge,

it is your responsibility to open and close traffic for each one,

according to its members’ business hours.
To open or close traffic to a hunt group, from an idle extension:

GRP. IN/OUT

z

Dial the prefix to open/close hunt groups.

This varies from one facility to another.

GROUP NO

z

Next, dial the internal number for the involved hunt group.

Â

Press the Loudspeaker key on your extension.

A confirmation that the service was accepted is provided both

visually and audibly; the “Accepted Service” message is displayed

on the screen, and the service acceptance tone is played.

í

Press your extension’s “C” key to end this service.

If the hunt group was previously open to traffic, it then progresses

to a closed status, and will no longer accept calls.
Calls to this group will then be directed to an overflow extension or

group, or a dissuasion message that may be pre-defined in terms

of each group’s configuration.
On the other hand, if the hunt group was previously closed to traffic,

it then progresses to an open status, and will now accept calls.
When your primary group is closed, its status is represented on

each member’s idle extension with a “C” displayed on the second

line of the screen.

Rx IN/OUT

Notes:

From any extension, the sequence <GRP. IN/OUT.>

<GROUP NO> may be saved on the extension’s repertory

keys. In this case, opening and closing each involved hunt

group is indicated by the status of the corresponding key’s

LED: if it is off, the group is closed; if it is on, the group is

open.

Only a supervisor may manage this open or closed group

status by pressing the corresponding key.

15:49 05 jun 2008
CS

405

Х

Ф

Advertising