AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 56)

Call Forwarding Services
MD Evolution – Dialog 4422 IP Office 56
í
Next, press the C (or Clear) key on your extension.
Your extension returns to idle status.
Call-Fwd
Х Ф
When there is a pre-programmed call forward activated, your
extension’s Call-fwd key LED will be lit.
Deactivating a Call Forward Pre-Defined
on the Call-fwd Key
On the other hand, to deactivate a pre-defined call forward assigned
to the Call-fwd (call forward) key on your extension:
Call-Fwd
Х Ф
Simply press the Call-fwd key on your extension, which
initially is turned on.
The pre-programmed call forward is immediately de-activated, and
confirmed to you with the service acceptance tone as well as a
corresponding message on your extension’s screen.
í
Next, press the C (or Clear) key on your extension.
Your extension returns to idle status.
Call-Fwd
Ô
When the pre-programmed call forward is de-activated, your
extension’s Call-fwd key LED will be turned off.
Call Forward on Mini-Message or
Absence
An alternative to all other available variable call forwarding services
(referred to above), you may also re-direct your extension to a mini-
messaging or call forward on absence service.
This does not consist of a call forward in its truest sense: your
incoming calls are not re-directed.
Rather, the absence message that you selected when defining the
call forward will be automatically transmitted to all internal and
external parties who are trying to reach you, in the form of an ISDN
mini-message, as long as that party’s phone is compatible with the
service. His/her call will be disconnected once the message has
been played.
CANCEL ACCEPTED CAL