AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 40)

Operations during a Call
MD Evolution – Dialog 4422 IP Office 40
Your first caller is automatically placed on hold, and the key repre-
senting the line on which the first call was placed will flash quickly.
NO TO CALL
z
Dial the number for the new party.
As indicated, you may use any dialling methods otherwise available
when placing a single call. Â
Press the Loudspeaker key on your extension.
You then follow the placement of this call in the same way as for a
single outgoing call.
Supposing that your first call is an internal call, you still have the
same services available to you for placing the second enquiry call
(depending on the second party’s status), as you would during a
single call (see also “Operations for Outgoing Calls”). Thus, you can:
•
Be placed on automatic camp-on if the new calling party’s
extension is busy.
• Activate the automatic call-back feature for the new called
extension that is busy, or not answering.
L1
Х Ф
Note: Rather than initially selecting a free line key on your
extension (for which the LED is turned off), you may instead
press the line key for the current call (for which the LED is
lit). The rest of the procedure is carried out as described.
15:49 05 jun 2008
Enter number: _
FREE
MARTIN Vincent
423