Follow-me service – AASTRA 4422 IP Office for MD Evolution User Guide User Manual

Page 58

Advertising
background image

Call Forwarding Services

MD Evolution – Dialog 4422 IP Office

58

This may also be the case for an external ISDN party that is compatible

with the mini-messaging service, assuming that he/she is in fact an

ISDN network user, and that he/she also uses an ISDN terminal

that is compatible with the mini-messaging service. This also

assumes that your extension is not specifically and permanently

protected against the use of this call forward on absence service

for external parties.
In the opposite case, a call issued from an incompatible external

party will be redirected to your facility’s attendants, who will see

your message that is automatically displayed on their extension,

and will be able to accurately inform your external calling parties.

Notes:

The prefix “61” is the one usually used to activate an imme-

diate call forward. It may, however, have been modified by

your system administrator.

A call forward on absence is cancelled in the same manner

as any other type of variable call forward – see previously

mentioned details.

Follow-Me Service

In the case where you may have forgotten to define your variable

call forward before leaving your extension, you may ask the attendants

to define it for your account. This refers to the third party call forward

service that is reserved specifically for them.
As the case may dictate, you may also remotely define your call

forward recipient from his/her internal extension, under the condition

that it is not an IP H.323 extension. This is the “Follow me” service.
The call forward remotely defined is always an “immediate” call

forward.
This is activated as described below, from an idle, remote extension,

which will be your call forward recipient:

65

z

Dial the prefix “65”, assigned to the Follow me service.

NO STATION

z

Then dial your own extension number.

PASSWORD

z

Finally, enter your user password.

By default, your user password is “1234”, however you may have

modified it. See also the “

Programming Your Extension’s Services

section.

Advertising