AASTRA 4422 IP Office for MD Evolution User Guide User Manual
Page 70
Voice Mail Services
MD Evolution – Dialog 4422 IP Office
70
4
z
Dial “4” to rewind within the current message.
The message is rewound to the point 10 seconds prior to the
current point.
5
z
Dial “5” to listen to pause or restart the current message.
Pressing the pause code the first time will suspend the play of the
message at the current point. Pressing the same code a second
time restarts the message from this same point; play will be auto-
matically restarted after a 15-second pause.
6
z
Dial “6” to listen to fast-forward within the current message.
The message is fast-forwarded to the point 10 seconds past to the
current point.
You may also request the date and time stamping for the message
to which you are currently listening. To do so:
7
z
Dial “7” to obtain the date and time stamping for the current
message.
Depending on whether the message was left on that same day or a
previous day, the day/month (DDMM) and hour/minute (HHMM)
data concerning when your message was left are transmitted
vocally on your extension (according to one of the forms described
below), and then your current message is restarted.
•
“Message received at HHMM to-day”.
•
“Message received at HHMM on DDMM”.
Once you have listened to your messages in whole or in part, you
may then individually erase each message, or request that your
entire mailbox be erased. To do so:
8
z
Dial “8” to listen erase the current message.
This can be carried out immediately following the message, or while
it is being played.
8
#
z
Dial “8 #” to erase all of the messages in your mailbox.
This pertains to both new and archived messages in your mailbox,
even if the former have not been heard.
In either case, a system message will prompt you to confirm erasing
the current message or all of your mailbox messages.
At any time, you may exit the voice mail system. To do so:
9
z
Dial “9” to end your call.
d
or
í
Hang up the handset, or press your extension’s “C” key to
end this service.
Your extension returns to idle status.