AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 102)

Physical Programming of Your Extension
MD Evolution – Dialog 4422 IP Office 102
Adjusting the Date and Time Display
Format for Your Extension
When your extension is idle, it will display the date and time, according
to one of the formats provided. The time follows either the 12 or 24-
hour format, and the date follows one of the various Latin or Anglo-
Saxon formats.
To set the time format displayed on your extension, after accessing
your extension’s physical programming mode and selecting the
“Time & Date” feature:
Â
Press the Loudspeaker key on your extension.
Your extension displays the following screen:
Â
Press the Loudspeaker key on your extension.
Your extension displays the following new screen:
ì
Press either the + or - key on your extension to select either
the 12 or 24-hour format.
Â
Press the Loudspeaker key on your extension.
Your setting is saved, then after several seconds, the previous
screen is re-displayed.
To set the format in which the date is to be displayed on your
screen, proceed as previously described. The programming
screens for the date format are illustrated below.
These adjustments are then reflected in how the date and time are
displayed on your idle extension.
Note: You do not need to adjust the date and time that will
be displayed on your extension. This information is directly
and systematically synchronised by the telephone system,
for the entire facility.
Language
Time & Date
Date Format
Time Format
~ 24 hour
| 12 hour
| 05 06 2008
~ 05 jun 2008