AASTRA 4422 IP Office for MD Evolution User Guide - Manual (Page 139)

139 MD Evolution – Dialog 4422 IP Office
IP Declaration and Start-Up of Your Extension
Note: Similar parameters are used for the IP configuration
of your desktop PC. These are accessible from your PC’s
“Control Panel”, under “Network Connections”.
Starting up Your Extension’s Services
During the initial setup of your Dialog 4422 IP Office, once these IP
network parameters have been defined, your extension will be auto-
matically restarted.
The process for starting up your extension is illustrated below, even
though it is entirely automatic.
The first screen that is displayed enables you to, if necessary, return
to the modification of your extension’s IP configuration by simulta-
neously pressing and holding the “C”, “*” and “5” keys for approxi-
mately 1 second, within 5 seconds of signing on.
If a DHCP server was configured, your extension will then be
connected to this DHCP server to recover its IP address. The
second screen illustrated below is then displayed:
GK
(Gatekeeper)
Defines the IP address for your MD Evolution’s xMV equipment
that uses the “IP H. 323 gatekeeper” and to which your extension
connects to be authenticated.
In conjunction with the previous parameter, this IP address is
defined automatically when your extension is started up.
Password For any IP extension within your MD Evolution system, the value of
this parameter must be “Yes”.
The user of any IP extension, you included, must enter his/her user
password in order to be securely authenticated within the system.
See the “ Logging In and Logging off Your Extension ” section.
Settings Application of Settings
User administration mode to
change IP settings
x
Connecting to DHCP
server