Programming your extension’s variable call-fwd key – AASTRA 4422 IP Office for MD Evolution User Guide User Manual
Page 105
105
MD Evolution – Dialog 4422 IP Office
Programming Your Extension’s Services
Programming Your Extension’s Variable
Call-fwd Key
To program a currently used variable call forward on your
extension’s Call-fwd key, in order to be able to activate or
deactivate the service by simply pressing this key, from your idle
extension:
# *
FWD TYPE
z
Dial the prefix that corresponds to the desired type of call
forward, preceded by the characters “#” and “*”.
Depending on the type of call forward, you will usually dial one of
the following:
61
To configure an immediate call forward.
62
To configure a call forward on no-answer condition.
63
To configure a call forward on busy condition.
69
To configure a call forward on no-answer condition and busy
condition.
64
To configure a Do not disturb call forward
In the first four cases,
FWD NO
z
Subsequently dial the internal or external number to receive
your call forwards.
The call forward recipient’s number may contain up to 18 digits,
including the network access prefix for an external number. An
external number may also be one that is accessible through
abbreviated dialling.
Â
Now press the loudspeaker key on your extension to confirm
your settings, in all cases.
The purpose of this is to validate your entry; your extension displays
its acceptance of your Call-fwd key programming by displaying the
following screen:
15:49 05 jun 2008
Enter number: #*61xxx
Call fwd 61407
#
*
61407