AASTRA 4422 IP Office for MD Evolution User Guide User Manual

Page 106

Advertising
background image

Programming Your Extension’s Services

MD Evolution – Dialog 4422 IP Office

106

í

Next, press the C (Clear or Erase) key on your extension to
end this service.

Your extension returns to idle status.

CALL-FWD

Ô

Your extension’s Call-fwd key has now been pre-
programmed. The call forwarding that you have just
programmed will only take effect when you press the Call-
fwd key. See the “

Call Forwarding Services

” section.

Note: The 61, 62, 63, 64 and 69 prefixes are usually used

to process the call forward service. They may, however,

have been modified by your system administrator.

Programming Your User Password

You will be prompted to enter your user password when accessing

certain services, most particularly:

When you log on to your extension or a third party set.

When placing a call in substitution or with signature from your

extension or a third party set.

When activating/deactivating a call forward from your extension

or a third party set (follow me service).

When consulting or personalising your mailbox within your facility’s

integrated voice mail system, when applicable.

By default, your user password is “1234”. It is strongly recommended

that you change it to any other 4-digit code – including the * or #

key – to ensure that use of the aforementioned services is as secure

as possible, and to preserve the confidentiality of your mailbox,

when applicable.
To do so, from your idle extension:

79

z

Dial the prefix “79” assigned to the user password
management service.

OLD PSW

z

Next, enter your current user password.

NEW PSW

z

Then, enter your new user password.

Â

Press the Loudspeaker key on your extension.

You will receive both visible and audible confirmation for registering

your new password: “PASSWORD REGISTERED” will be displayed

on your screen, and the service acceptance tone will be played.

Advertising