Xylem 19 001 300 R2 Silent Storm VFD Pumping System OMRON Touch Screen Display Manual - Manual (Page 132)

© 2013 Flowtronex
128 Omron Touch-Screen Display
· Tap the value underneath a Pump # for a specific Combo number to change its state from a zero
(0) that disables it, to a one (1) enabling it. Note that the number one (1) is displayed in a green
block.
· To disable a pump from a combo, tap on the green one (1). The system toggles the number from
a one to a zero disabling the pump from the Combo.
There are two instances when you might want to change your combos: when you add a pump, or when
changing the order that the pumps start. In the former example, you will need to go to your Combo and
Auxiliary Setpoints screen, and increase the number for N20:1 (Maximum Combo, Normal), as well as
the B60:xx Pump & Accessory Definitions screen and changing your objects. In the latter instance, you
may need to go to the Combo and Auxiliary Setpoints screen and increase the number for N20:1
(Maximum Combo, Normal).
· Optionally, press the Main Menu touch key to return to the Main Menu. (See also, Main Menu .)
· Optionally, press the Back key to go to the Combo Menu.
· Press the down arrow (▲) to advance to page 1, Combo Table 1-4.
2.23.2 Access Combo Menu from the Register Access Menu
The Combo Menu may also be accessed from the B Register Access screen. Access the Register
Access screen by pressing the Register Access key on the
Main Menu .