Xylem 19 001 300 R2 Silent Storm VFD Pumping System OMRON Touch Screen Display Manual - Manual (Page 24)

© 2013 Flowtronex
20 Omron Touch-Screen Display
PLC for Zone 3 and 4.
· Press Update touch key to update values from the PLC.
Note:
Always press the Update touch key. This will accomplish two functions. It will grab
the current values from the PLC, and it continuously updates the values while this
screen is open.
Be very careful about pressing the Reset touch key, as it resets all four flows (if
your station is so equipped). If you have more than two flows, it is recommended
that you advance to the second page before pressing the Reset touch key.
· Optionally, press the Reset touch key to reset the values. (See note above).
· Optionally, press Back to return to the Main Menu.
· Press the up arrow (▲) in the bottom right corner of the screen to return to the first Station Flow
Total screen.
1.1.8 Start Stop Menu (Combo Menu)
Access the Combo Menu by pressing the StartStop key on the Main Menu.
· Tap the StartStop Menu key on the Main Menu to display the Combo Menu Screen.