Xylem 19 001 300 R2 Silent Storm VFD Pumping System OMRON Touch Screen Display Manual User Manual
Page 78
![background image](/manuals/310200/78/background.png)
© 2013 Flowtronex
74
Omron Touch-Screen Display
To recap the introduction to the calibration section:
· On a station with one flow meter, channel 2 is used for the the primary flow.
· On dual zone stations, the flow meter for zone 1 is on channel 5, and the flow meter for zone 2 is
found on channel 6. Channel 2 totals the two zones.
· On triple zone stations, the flow meter for zone 1 is on channel 5, and the flow meter for zone 2 is
on channel 6, and the flow meter for zone 3 is on channel 7. Channel 2 totals the three zones.
2.13.2.1 Analog Flowmeter (Krohne)
Access the Register Access screen by pressing the Register Access key on the
Main Menu
.The
calibration screens are accessed from the Register Access screen by pressing the N Register Menu
touch key.