3 change combo parameters – Xylem 19 001 300 R2 Silent Storm VFD Pumping System OMRON Touch Screen Display Manual User Manual

Page 34

Advertising
background image

© 2013 Flowtronex

30

Omron Touch-Screen Display

 

 

 

 

2.3 Change Combo Parameters

 

You can define combo setpoints and parameters by pressing the Register Access touch key on the

Main Menu

and opening the Register Access screen.

 

 

 

· Press the N20 & N21 Combo & Auxiliary Setpoints touch key on the Register Access screen to

open the first of three Combo setpoints screens.

 

 

· Tap the value field next to any of these registers and the calculator/keypad pops-over the screen.

Enter or edit the value. (See also,

Calculator/Keypad

.)

 

– Enter the normal mode setpoint in PSI in the N20:0 register. A common setpoint is 120 PSI.

 

– Enter the maximum number of combos (1 to 8) normally used in the N20:1 register.

Advertising