Xylem 19 001 300 R2 Silent Storm VFD Pumping System OMRON Touch Screen Display Manual - Manual (Page 48)

© 2013 Flowtronex
44 Omron Touch-Screen Display
· Press the Lockout Settings touch key on the Register Access screen to open the first of four
Lockout Registers screens.
Lockouts are normally used to restrict the number of pumps that can be used within a given time
frame. They can be set up to run at different setpoints then the normal irrigation cycle.
· N20:0 defines the Normal, PSI Setpoint. A common setpoint used is 120 PSI.
· N20:3 defines the Lockout 1, PSI Setpoint. A common setpoint used is 120 PSI.
· N20:5 defines the Lockout 2, PSI Setpoint. A common setpoint used is 120 PSI.
· N20:1 defines the Max(imum) Combos under Normal conditions. Up to eight combos can be set