Help windows – Xylem IM131R01 AQUAVAR AV II User Manual
Page 81
80
Help Windows
Window text
Help Text
Test Run Man.
Start test run with up and down arrows
(Inc + Dec)
simultaneously.
Test Frequency
Test frequency. Frequency at when motor
30.0 Hz
will run in test mode.
Submenu
Submenu: errors; to enter push “ “ key
Errors
for at least two seconds.
Conveyor Limit
Value at which pump system shall be deactivated,
due to lack of NPSH or system pressure.
Delay Seconds
Enter a time the pump is allowed to run after a
Disabled (Default)
suction line sensor has activated, or conveyor
limit has been reached.
Error Reset
Automatic error reset measured in seconds. The
On
AV II will restart 5 times. If error is still present,
the AV II will stay off on faults.
Clear Errors
Clear error history, enter 0726
0000
and press the “ ” key.
Operating Hours
Total AQUAVAR controller operating time
xxxxh
(reset counters: press the up and down arrows).
Disp. Contrast
Display contrast, 0-100% contrast.
100%, 50% Default
Set Password
Modify password enables the user to set a new
0000
password.
Lock Function
On > keypad locked: off > changes allowed.
Off
Submenu
Submenu load default parameters to enter
Default Values
push select at least 1 second.
Default USA/Europe
Reset to default parameters for US or European
Press up and down arrows (if needed).
settings.
Save ???
Press Inc + Dec to save entered values
Inc + dec
*
*