Xylem IM131R01 AQUAVAR AV II - Manual (Page 87)

Power and Current Ratings (continued)
Specifications
Environmental MAXIMUM HEATSINK TEMP. = 100º C (212º F)
Operating temperature 0ºC to +40ºC (32ºF to 104ºF) *
Storage temperature -20ºC to +65ºC (-4ºF to 149ºF)
Humidity 0% to 95% non-condensing
Altitude 1000 m (3300 ft) without derating *
Acoustic noise 80 dBA sound power at 1 m (3 ft)
Electrical
Voltage input AV2C2x models: 200 to 230 Vac, ±15%
AV2C4x models: 380 to 460 Vac, ±15%
AV2C5x models: 575 Vac, ±15%
Input Line frequency 50 / 60 Hz ±2 Hz
Overvoltage trip 407 Vdc 814 Vdc 1017 Vdc (DC BUS Voltage)
Undervoltage trip 202 Vdc 404 Vdc 505 Vdc (DC BUS Voltage)
Output voltage 0 to 100% of line voltage, 3 Phase
Overload capacity 110% of rated rms for 60 seconds
Rated output frequency 50/60 Hz ±5%
Timed overload Adjustable time trip set for 110%
of rated motor current
Agency listing UL and CUL Listed, CE marked
Control Features
Protective features Overcurrent, overvoltage, phase loss, motor over-
and circuits temperature, overtemperature, ground fault,
undervoltage, short circuit, sensor fault.
* For high ambient temperatures, derate HP of drive. Altitudes above 3300 ft. of sea level,
derate 2% of HP for every 1000 ft. above 3300 ft. Consult factory for assistance.
Technical Characteristics
86