2 connecting the power pack, 3 mounting the stand, Connecting the power pack – YSI TruLab 1320P User Manual
Page 13: Mounting the stand
Advertising
TruLab pH/ISE 1320
Commissioning
ba76157e01
03/2014
13
3.3.2 Connecting the power pack
3.3.3 Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 14 T
CAUTION
Use original power packs only (see section 14 T
page 94).
1.
Connect the plug of the power pack to the socket for the power pack on
the TruLab pH/ISE 1320.
2.
Connect the original power pack to an easily accessible power outlet.
1
2
Advertising
This manual is related to the following products: