YSI TruLab 1320P - Manual (Page 79)

TruLab pH/ISE 1320 Data storage
ba76157e01 03/2014
79
You have the following options:

To erase the entire storage, confirm Yes.
 To cancel the storage process and switch to the measured value display,
confirm No. Then you can e.g. transmit the stored data to a PC (see section
10.3.1 E
DITING THE MEASUREMENT DATA STORAGE , page 81) and subse-
quently erase the data storage (see section 10.3.2 E RASING THE MEASURE -
MENT DATA STORAGE , page 83).
10.2 Automatic data storage at intervals
The storage interval (Interval) determines the time interval between automatic
data storage processes. With each data storage process, the current datasets
of the sensors indicated on the display are transmitted to the interface at the
same time.
Configuring the
automatic storage
function
Data storage full. Erase?
Yes
No
Warning
12.12.2012
12:12
Back
1. Press the <STO__> key.
The menu for automatic data storage appears.
1 Adjusted entire storage duration
2 Max. available storage duration
3 Graphical display of the storage usage
1
ID number 1
Interval 30 s
Duration 180 min
Continue
0d03h00min
0 1d17h33min
Automatic data storage
12.12.2012
12:12
2
3
Back