YSI TruLab 1320P - Manual (Page 66)

Settings TruLab pH/ISE 1320
66
ba76157e01 03/2014
9 Settings
9.1 Measurement settings
9.1.1 Settings for pH measurements
The settings for pH measurements are made in the menu for calibration and
measurement settings of the pH/ORP measurement. To open the settings, dis-
play the required measured parameter in the measured value display and
press the <MENU/ENTER> key. After completing the settings, switch to the
measured value display with <M>.
In the following table, only those settings are listed that concern the pH mea-
surement.
Default settings are printed in bold.
Menu item Possible set-
ting Description
Calibration /Cali-
bration record - Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage /Display - Displays the calibration record.
Further options:

Scroll through the calibration
records with <><>.
 Output the displayed calibration
record to the interface with
<F2>/[USB output].
 Output all calibration records to
the interface with <F2__>[USB
output].
 Quit the display with <F1>/
[Back] or <MENU/ENTER>.
 Switch directly to the measured
value display with <M>.
Calibration /
Calibration data
storage /
Output to USB
- Outputs the calibration records to
the interface.