4 printer (only trulab ph/ise 1320 p), 1 commissioning / switching the printer on or off, Printer (only trulab ph/ise 1320 p) – YSI TruLab 1320P User Manual
Page 14: Commissioning / switching the printer on or off, Section 4 p, Rinter, Only
Printer (only TruLab pH/ISE 1320 P)
TruLab pH/ISE 1320
14
ba76157e01
03/2014
4
Printer (only TruLab pH/ISE 1320 P)
4.1
Commissioning / switching the printer on or off
Switching on the
printer
Switching off the
printer
1 Operating LED
– Is illuminated: Printer is switched on
– Flashes: Printer is switched off
2 Control panel with the keys <FEED> and <ON/OFF>
3 Lever to open the paper compartment
4 Lid of the paper compartment
2
1
3
4
1.
Connect the power pack to the TruLab pH/ISE 1320 P.
The LED lights up green. The printer is ready for operation.
or
When the printer had been switched off (LED flashing):
Switch on the printer with <ON/OFF>.
The LED lights up green. The printer is ready for operation.
If there is a USB-B connection at the same time (e.g. to a PC), the
data are output to the PC only.
1.
Switch off the printer with <ON/OFF>.
The LED flashes. The printer is switched off.