YSI TruLab 1320P - Manual (Page 22)

Operation TruLab pH/ISE 1320
22
ba76157e01 03/2014
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <MENU/ENTER>. Subse-
quently, the setting can be changed with <><> and <MENU/ENTER>.
Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <MENU/ENTER>.
Example: Display the Calibration record function.
 Messages
Information is marked by the
i
symbol. They cannot be selected. Example:
General
Interface
Clock
Service information
Reset
System
12.12.2012
12:12
Back
Language: Deutsch
Beep : Off
Illumination : On
Contrast : 50 %
Switchoff time : 1 h
Temperature unit : °C
Stability control : On
General
12.12.2012
12:12
Back
Calibration record
Calibration data storage
Serial number (sensor)
Buffer
: TEC
One point calibration : Yes
Calibration interval : 7 d
Unit for slope : mV/pH
i 2.00 4.01 7.00 10.01
pH
12.12.2012
12:12
Back