YSI TruLab 1320P - Manual (Page 13)

TruLab pH/ISE 1320 Commissioning
ba76157e01 03/2014
13
3.3.2 Connecting the power pack
3.3.3 Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 14 T
ECH -
NICAL DATA
, page 94).
CAUTION
Use original power packs only (see section 14 T ECHNICAL DATA ,
page 94).
1. Connect the plug of the power pack to the socket for the power pack on
the TruLab pH/ISE 1320.
2. Connect the original power pack to an easily accessible power outlet.
1
2